学习在 ubuntu 系统下安装 vsftp 软件安装教程
最编程
2024-03-19 07:12:10
...
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone? vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=NO
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in your local time zone. The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories. See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty. Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
ssl_enable=NO
#
# Uncomment this to indicate that vsftpd use a utf8 filesystem.
#utf8_filesystem=YES
#连接ftp服务器使用的端口
listen_port=21
# 设置FTP用户的本地根目录,也就是说,FTP用户登录后,其工作目录将被限制在该目录及其子目录下。
local_root=/data/web
#被动模式的端口范围
pasv_enable=YES
pasv_min_port=1025
pasv_max_port=2025
# 欢迎语
ftpd_banner=Welcome to use my test ftp server
上一篇: 女人过了 30 岁就老了吗?
推荐阅读
-
在Linux系统下安装和使用软件解压RAR文件的方法
-
简单易懂!Ubuntu/CentOS系统下LNMP+Discuz的安装教程
-
如何在UEFI环境下,利用GRUB2引导安装Windows 10和Ubuntu的双系统?一份详细的教程
-
在Win10上安装Ubuntu双系统无需U盘教程
-
【区块链技术开发语言】在ubuntu18 系统环境下命令操作安装GO语言开发环境
-
如何轻松使用JMeter进行HTTP接口测试 - 一步步教你设置线程组、 cookie、默认值与Sampler,加上响应断言和监听器,打造基础测试案例。针对复杂情况,将子系统和流程测试分类组织,确保数据一致性。同时,别忘了感谢阅读,给新手提供实战学习资源与全套测试指南,助你轻松踏上自动化测试之路! - 在"测试计划"点击右键,添加"线程组"并设定初始"线程数"和"循环次数" - 配置"HTTP Cookie管理器"与"Http请求默认值",输入目标系统信息,如域名、端口、协议等,让所有相关Sampler共享这些默认设置 - 在线程组内增加"HTTP Request"的Sampler,并填入接口详情,比如路径、请求方法及参数 - 添加"响应断言"检查接口返回结果,通过正则表达式验证预期结果 - 安装监听器,实时查看测试执行状况 - 如需处理流程性接口,请依次添加多个相关Sampler,关联前后请求间的上下文数据 特别提示:为了帮助大家避免学习中的曲折,我们准备了详尽的视频和文档资料库,无论你是软件测试的新手还是老司机,都能从中找到所需的全方位支持。只需点击下方链接加入我们的学习交流社群,就能立刻获取这份珍贵的学习宝藏!再次感谢您的耐心阅读,愿它成为您前行路上的一大助力!
-
包婷婷 (201550484)作业一 统计软件简介与数据操作-SPSS(Statistical Product and Service Solutions),"统计产品与服务解决方案"软件。最初软件全称为"(SolutionsStatistical Package for the Social Sciences),但是随着SPSS产品服务领域的扩大和服务深度的增加,SPSS公司已于2000年正式将英文全称更改为"统计产品与服务解决方案",标志着SPSS的战略方向正在做出重大调整。为IBM公司推出的一系列用于统计学分析运算、数据挖掘、预测分析和决策支持任务的软件产品及相关服务的总称SPSS,有Windows和Mac OS X等版本。 1984年SPSS总部首先推出了世界上第一个统计分析软件微机版本SPSS/PC+,开创了SPSS微机系列产品的开发方向,极大地扩充了它的应用范围,并使其能很快地应用于自然科学、技术科学、社会科学的各个领域。世界上许多有影响的报刊杂志纷纷就SPSS的自动统计绘图、数据的深入分析、使用方便、功能齐全等方面给予了高度的评价。 R统计软件介绍 R是一套完整的数据处理、计算和制图软件系统。其功能包括:数据存储和处理系统;数组运算工具(其向量、矩阵运算方面功能尤其强大);完整连贯的统计分析工具;优秀的统计制图功能;简便而强大的编程语言:可操纵数据的输入和输出,可实现分支、循环,用户可自定义功能。 与其说R是一种统计软件,还不如说R是一种数学计算的环境,因为R并不是仅仅提供若干统计程序、使用者只需指定数据库和若干参数便可进行一个统计分析。R的思想是:它可以提供一些集成的统计工具,但更大量的是它提供各种数学计算、统计计算的函数,从而使使用者能灵活机动的进行数据分析,甚至创造出符合需要的新的统计计算方法。 该语言的语法表面上类似 C,但在语义上是函数设计语言(functional programming language)的变种并且和Lisp 以及 APL有很强的兼容性。特别的是,它允许在"语言上计算"(computing on the language)。这使得它可以把表达式作为函数的输入参数,而这种做法对统计模拟和绘图非常有用。 R是一个免费的*软件,它有UNIX、LINUX、MacOS和WINDOWS版本,都是可以免费下载和使用的。在R主页那儿可以下载到R的安装程序、各种外挂程序和文档。在R的安装程序中只包含了8个基础模块,其他外在模块可以通过CRAN获得。 二、R语言 R是用于统计分析、绘图的语言和操作环境。R是属于GNU系统的一个*、免费、源代码开放的软件,它是一个用于统计计算和统计制图的优秀工具。 R作为一种统计分析软件,是集统计分析与图形显示于一体的。它可以运行于UNIX,Windows和Macintosh的操作系统上,而且嵌入了一个非常方便实用的帮助系统,相比于其他统计分析软件,R还有以下特点: 1.R是*软件。这意味着它是完全免费,开放源代码的。可以在它的网站及其镜像中下载任何有关的安装程序、源代码、程序包及其源代码、文档资料。标准的安装文件身自身就带有许多模块和内嵌统计函数,安装好后可以直接实现许多常用的统计功能。[2] 2.R是一种可编程的语言。作为一个开放的统计编程环境,语法通俗易懂,很容易学会和掌握语言的语法。而且学会之后,我们可以编制自己的函数来扩展现有的语言。这也就是为什么它的更新速度比一般统计软件,如,SPSS,SAS等快得多。大多数最新的统计方法和技术都可以在R中直接得到。[2] 3. 所有R的函数和数据集是保存在程序包里面的。只有当一个包被载入时,它的内容才可以被访问。一些常用、基本的程序包已经被收入了标准安装文件中,随着新的统计分析方法的出现,标准安装文件中所包含的程序包也随着版本的更新而不断变化。在另外版安装文件中,已经包含的程序包有:base一R的基础模块、mle一极大似然估计模块、ts一时间序列分析模块、mva一多元统计分析模块、survival一生存分析模块等等.[2] 4.R具有很强的互动性。除了图形输出是在另外的窗口处,它的输入输出窗口都是在同一个窗口进行的,输入语法中如果出现错误会马上在窗口口中得到提示,对以前输入过的命令有记忆功能,可以随时再现、编辑修改以满足用户的需要。输出的图形可以直接保存为JPG,BMP,PNG等图片格式,还可以直接保存为PDF文件。另外,和其他编程语言和数据库之间有很好的接口。[2] 5.如果加入R的帮助邮件列表一,每天都可能会收到几十份关于R的邮件资讯。可以和全球一流的统计计算方面的专家讨论各种问题,可以说是全世界最大、最前沿的统计学家思维的聚集地.[2] R是基于S语言的一个GNU项目,所以也可以当作S语言的一种实现,通常用S语言编写的代码都可以不作修改的在R环境下运行。 R的语法是来自Scheme。R的使用与S-PLUS有很多类似之处,这两种语言有一定的兼容性。S-PLUS的使用手册,只要稍加修改就可作为R的使用手册。所以有人说:R,是S-PLUS的一个“克隆”。 但是请不要忘了:R是免费的(R is free)。R语言源代码托管在github,具体地址可以看参考资料。[3] 。 R语言的下载可以通过CRAN的镜像来查找。 R语言有域名为.cn的下载地址,有六个,其中两个由Datagurn,由 中国科学技术大学提供的。R语言Windows版,其中由两个下载地点是Datagurn和 USTC提供的。 三、stata Stata 是一套提供其使用者数据分析、数据管理以及绘制专业图表的完整及整合性统计软件。它提供许许多多功能,包含线性混合模型、均衡重复反复及多项式普罗比模式。用Stata绘制的统计图形相当精美。 新版本的STATA采用最具亲和力的窗口接口,使用者自行建立程序时,软件能提供具有直接命令式的语法。Stata提供完整的使用手册,包含统计样本建立、解释、模型与语法、文献等超过一万余页的出版品。 除此之外,Stata软件可以透过网络实时更新每天的最新功能,更可以得知世界各地的使用者对于STATA公司提出的问题与解决之道。使用者也可以透过Stata. Journal获得许许多多的相关讯息以及书籍介绍等。另外一个获取庞大资源的管道就是Statalist,它是一个独立的listserver,每月交替提供使用者超过1000个讯息以及50个程序。 四、PYTHON
-
在 UEFI 启动模式下安装 Ubuntu 16.04 的教程
-
使用 winzip 生成的扩展名为 -ZIP 的压缩文件通常使用".zip "扩展名,其 MIME 格式为 application/zip。(推荐学习:phpstorm) 目前,ZIP 格式属于几种主流压缩格式之一,其竞争对手包括 RAR 格式和开源的 7z 格式。 从性能对比来看,RAR 和 7z 格式比 ZIP 格式压缩率更高,而 7-Zip 由于提供免费压缩工具而逐渐在更多领域得到应用。 微软从 Windows ME 操作系统开始就内置了对 zip 格式的支持,即使用户没有在电脑上安装解压软件,也可以打开和创建 zip 格式的压缩文件,OS X 和流行的 Linux 操作系统也提供了类似的 zip 格式支持。 因此,如果要在网络上传播和分发文件,zip 格式往往是最常见的选择。
-
VASP学习】在Ubuntu系统中安装vasp.5.4.4的全过程(包括VASP官方学习资料、安装过程中相关编辑器的配置、VASP的编译和VASP测试)