Springboot 中的 ModelAndView 跳转设置
最编程
2024-04-29 21:42:17
...
想要在springboot项目中跳转页面可以使用ModelAndView
前提是首先需要导入thymeleaf的依赖
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-thymeleaf</artifactId>
<!-- 版本号是根据你的springboot项目的版本来 可以写也可以不写
(不写默认就是根据创建的springboot项目本版本设置)-->
<version>2.6.5</version>
</dependency>
如果不想用自带的版本 可以去 https://mvnrepository.com/artifact/org.springframework.boot/spring-boot-starter-thymeleaf
mvnrepository上面找到你想要的版本进行设置
thymeleaf默认的是找.html文件,在templates文件夹下面的 如果你想更改搜索的位置 你可以在application.yml或者application.properties 中设置
下面是application.yml的设置
thymeleaf:
#这两个值都是默认的前后缀 可以根据需要自行更改
suffix: .html
prefix: classpath:/templates
跳转的路径写法
我要跳转的目标是:templates/admin/login.html
controller层写法就是:
@RequestMapping("/toLogin")
public ModelAndView loginPage(){
ModelAndView modelAndView = new ModelAndView();
modelAndView.setViewName("admin/login");
return modelAndView;
}
这样就可以跳转过去
注意:如果找不到页面需要查看maven中是否加载了thymeleaf的依赖
再就是编译后的target中是否有跳转的页面
最后使用thymeleaf时前端加上下面的这个数据才能生效
xmlns:th="http://www.thymeleaf.org
<!DOCTYPE html>
<!--使用前端时记得加上这个 在html标签后加上 -->
<html xmlns:th="http://www.thymeleaf.org">
<head>
<title>Good Thymes Virtual Grocery</title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<link rel="stylesheet" type="text/css" media="all"
href="../../css/gtvg.css" th:href="@{/css/gtvg.css}" />
</head>
<body>
<p th:text="#{home.welcome}">Welcome to our grocery store!</p>
</body>
</html>
推荐阅读
-
springboot 中的时区转换方案
-
阿里开放源码软件中的 SpringBoot 简单易用
-
如何在 Questionstar 中设置跳转 - 掘金
-
Springboot 中的 ModelAndView 跳转设置
-
SpringBoot 页面跳转访问 css、js 和其他静态资源引用无效的解决方案 (VI)
-
问:如何设置最大行数并隐藏 flexbox 容器中的其他元素?
-
如何在 Google Chrome 浏览器中启用暗黑模式?在 Google Chrome 浏览器中设置黑暗模式的步骤
-
linux 中的高级子网设置
-
Redis 事务在 SpringBoot 中的应用 (io.lettuce.core.RedisCommandExecutionException: ERR EXEC without MULTI)
-
正负偏差变量 即 d2+、d2- 分别表示决策值中超出和未达到目标值的部分。而 di+、di- 均大于 0 刚性约束和目标约束(柔性目标约束有偏差) 在多目标规划中,>=/<= 在刚性约束中保持不变。当需要将约束条件转换为柔性约束条件时,需要将 >=/<= 更改为 =(因为已经有 d2+、d2- 用来表示正负偏差),并附加上 (+dii-di+) 注意这里是 +di、-di+!之所以是 +di,-di+,是因为需要将目标还原为最接近的原始刚性约束条件 优先级因素和权重因素 对多个目标进行优先排序和优先排序 目标规划的目标函数 是所有偏差变量的加权和。值得注意的是,这个加权和都取最小值。而 di+ 和 dii- 并不一定要出现在每个不同的需求层次中。具体分析需要具体问题具体分析 下面是一个例子: 题目中说设备 B 既要求充分利用,又要求尽可能不加班,那么列出的时间计量表达式即为:min z = P3 (d3- + d3 +) 使用 + 而不是 -d3 + 的原因是:正负偏差不可能同时存在,必须有 di+di=0 (因为判定值不可能同时大于目标值和小于目标值),而前面是 min,所以只要取 + 并让 di+ 和 dii- 都为正值即可。因此,得出以下规则: 最后,给出示例和相应的解法: 问题:某企业生产 A 和 B 两种产品,需要使用 A、B、C 三种设备。下表显示了与工时和设备使用限制有关的产品利润率。问该企业应如何组织生产以实现下列目标? (1) 力争利润目标不低于 1 500 美元; (2) 考虑到市场需求,A、B 两种产品的生产比例应尽量保持在 1:2; (3)设备 A 是贵重设备,严禁超时使用; (4)设备 C 可以适当加班,但要控制;设备 B 要求充分利用,但尽量不加班。 从重要性来看,设备 B 的重要性是设备 C 的三倍。 建立相应的目标规划模型并求解。 解:设企业生产 A、B 两种产品的件数分别为 x1、x2,并建立相应的目标计划模型: 以下为顺序求解法,利用 LINGO 求解: 1 级目标: 模型。 设置。 variable/1..2/:x;! s_con_num/1...4/:g,dplus,dminus;!所需软约束数量(g=dplus=dminus 数量)及相关参数; s_con(s_con_num);! s_con(s_con_num,variable):c;!软约束系数; 结束集 数据。 g=1500 0 16 15. c=200 300 2 -1 4 0 0 5; 结束数据 min=dminus(1);!第一个目标函数;!对应于 min=z 的第一小部分;! 2*x(1)+2*x(2)<12;!硬约束 @for(s_con_num(i):@sum(variable(j):c(i,j)*x(j))+dminus(i)-dplus(i)=g(i)); !使用设置完成的数据构建软约束表达式; ! !软约束表达式 @for(variable:@gin(x)); !将变量约束为整数; ! 结束 此时,第一级目标的最优值为 0,第一级偏差为 0: 第二级目标: !求 dminus(1)=0,然后求解第二级目标。 模型。 设置。 变量/1..2/:x;!设置:变量/1..2/:x; ! s_con_num/1...4/:g,dplus,dminus;!软约束数量及相关参数; s_con(s_con_num(s_con_num));! s_con(s_con_num,variable):c;! 软约束系数; s_con(s_con_num,variable):c;! 结束集 数据。 g=1500 0 16 15; c=200 300 2 -1 4 0 0 5; 结束数据 min=dminus(2)+dplus(2);!第二个目标函数 2*x(1)+2*x(2)<12;!硬约束 @for(s_con_num(i):@sum(variable(j):c(i,j)*x(j))+dminus(i)-dplus(i)=g(i)); ! 软约束表达式;! dminus(1)=0; !第一个目标结果 @for(variable:@gin(x)); ! 结束 此时,第二个目标的最优值为 0,偏差为 0: 第三目标 !求 dminus(2)=0,然后求解第三个目标。 模型。 设置。 变量/1..2/:x;!设置:变量/1..2/:x; ! s_con_num/1...4/:g,dplus,dminus;!软约束数量及相关参数; s_con(s_con_num(s_con_num));! s_con(s_con_num,variable):c;! 软约束系数; s_con(s_con_num,variable):c;! 结束集 数据。 g=1500 0 16 15; c=200 300 2 -1 4 0 0 5; 结束数据 min=3*dminus(3)+3*dplus(3)+dminus(4);!第三个目标函数。 2*x(1)+2*x(2)<12;!硬约束 @for(s_con_num(i):@sum(variable(j):c(i,j)*x(j))+dminus(i)-dplus(i)=g(i)); ! 软约束表达式;! dminus(1)=0; !第一个目标约束条件; ! dminus(2)+dplus(2)=0; !第二个目标约束条件 @for(variable:@gin(x));! 结束 最终结果为 x1=2,x2=4,dplus(1)=100,最优利润为