在 Windows 95/98 中实现苹果窗口界面
有没有想过在Windows环境下实现苹果电脑窗口界面的风格?下面就以实现苹果电脑窗口风格为例,进行一次奇妙的旅行。
原 理
仔细观察苹果窗口,发现和Windows窗口的区别主要体现在标题栏和控制按钮(即最小化、恢复、关闭按钮)。所以我们应该把主要精力集中在这两点上,直接对Windows窗口已有的标题栏和控制按钮进行修改。
由于标题栏和控制按钮都属于非客户区,所以关键是获得非客户区的CDC,可以通过GetWindowDC()来获得。GetWindowDC()可以获得整个窗口的CDC,当然也包括非客户区的CDC,得到此CDC后,确定标题条的确切位置,就可以在标题栏上为所欲为了。如图1所示,在标题栏的位置装入一幅位图(截取了苹果窗口的一幅位图),在位图上加上文字标题(此标题具有3D效果,感觉还不错吧,其实就是把相同的字用不同的颜色和坐标写了两次)和控制按钮(实际也是一幅位图,只不过在鼠标单击时显示另一幅位图,看起来就像是一个按钮),由于控制按钮是自己加的,所以要由自己负责单击按钮的处理。到此为止,虽然准备好了窗口的标题栏和按钮,但还没有机会显示。我们知道要在窗口的客户区上画东东,只需响应Windows的客户区重画消息,在此消息处理函数中实现具体的操作。同理,要在非客户区上画东东,也只需响应Windows的非客户区重画消息,在消息处理函数中完成标题栏和按钮的绘制。
具体实现
采用VC6.0在Windows98下实现这种技术。
下面以生成一个苹果界面风格的对话框为例对这种方法进行详细的阐述。
1、用APPWIZARD(应用程序向导)生成一个新的应用程序(SDI与MDI均可),在 RESOURCE VIEW里面添加一个DIALOG资源。
2、添加一个新的对话框类。在ClassWizard中选择添加新类,输入类名CTestDlg并且选取基类CDIALOG。这样就建立起对话框类和对话框资源之间的联系。
3、在RESOURCE VIEW 中加入按钮和标题栏和背景位图。
在主菜单中的INSERT 菜单项下面选择RESOURCE,然后选择添加BITMAP,这样你就可以在RESOURCEVIEW 中看到BITMAP项,下面点击鼠标右键,选择IMPORT,从已有的位图文件中选出苹果风格的按钮和标题栏,并且分别赋予不同的ID。
4、在自己创建的CTestDlg类中添加新的按钮和新的标题栏。
(1)首先在CTestDlg的构造函数中装入位图资源。程序如下:
CTestDlg::CTestDlg(int nID, CWnd* pParent /*=NULL*/) : CDialog(nID, pParent) { //{{AFX_DATA_INIT(CTestDlg) // NOTE: the ClassWizard will add member initialization here //}}AFX_DATA_INIT m_bPressed=FALSE; //load the bitmap of button_down m_bitmapPressed.LoadBitmap(IDB_BUTTONDOWN); //load the bitmap of button_up m_bitmapUnpressed.LoadBitmap(IDB_BUTTONUP); //load the bitmap of caption m_bitmapCaption.LoadBitmap(IDB_CAPTION); //load the bitmap of background m_bmpBk.LoadBitmap(IDB_BKGROUND); }
(2)分别得到标题栏和按钮的位置。
首先得到按钮的位置:
void CTestDlg::GetButtonRect(CRect& rect) { GetWindowRect(&rect); // for small caption use SM_CYDLGFRAME rect.top += GetSystemMetrics(SM_CYFRAME)+1; // for small caption use SM_CYSMSIZE rect.bottom =rect.top +GetSystemMetrics(SM_CYSIZE)-4; // for small caption use SM_CXDLGFRAME rect.left =rect.right -GetSystemMetrics(SM_CXFRAME); // for small caption use SM_CXSMSIZE GetSystemMetrics(SM_CXSIZE))-1; // for small caption use SM_CXSMSIZE rect.right =rect.left +GetSystemMetrics(SM_CXSIZE)-3; }
然后得到标题栏的位置:
void CTestDlg::GetCaptionRect(CRect &rect) { GetWindowRect(&rect); // for small caption use SM_CYSMSIZE rect.bottom =rect.top+GetSystemMetrics(SM_CYSIZE)+3; }
5.在按钮和标题栏对应的位置上分别画出苹果风格的按钮和标题栏。
首先画出按钮:
void CTestDlg::DrawButton() { // if window isn't visible or is minimized, skip if (!IsWindowVisible() || IsIconic()) return; // get appropriate bitmap CDC memDC; CDC* pDC = GetWindowDC(); memDC.CreateCompatibleDC(pDC); memDC.SelectObject(m_bPressed ? &m_bitmapPressed : &m_bitmapUnpressed); // get button rect and convert it into non-client area coordinates CRect rect, rectWnd; GetButtonRect(rect); GetWindowRect(rectWnd); rect.OffsetRect(-rectWnd.left, -rectWnd.top); int width,height; BITMAP *pBitMap; pBitMap = new BITMAP; if (m_bPressed) m_bitmapPressed.GetBitmap(pBitMap); else m_bitmapUnpressed.GetBitmap(pBitMap); width=pBitMap->bmWidth; height=pBitMap->bmHeight; // draw it pDC->StretchBlt( rect.left, rect.top, rect.Width(), rect.Height(), &memDC, 0, 0,width,height,SRCCOPY ); memDC.DeleteDC(); ReleaseDC(pDC); delete pBitMap; }
然后画出标题栏:
void CTestDlg::DrawCaption() { if (!IsWindowVisible() || IsIconic()) return; // get appropriate bitmap CDC memDC; CDC* pDC = GetWindowDC(); memDC.CreateCompatibleDC(pDC); memDC.SelectObject(m_bitmapCaption); // get button rect and convert it into non-client area coordinates CRect rect, rectWnd; GetCaptionRect(rect); GetWindowRect(rectWnd); rect.OffsetRect(-rectWnd.left, -rectWnd.top); // draw the caption int width,height; BITMAP *pBitMap; pBitMap = new BITMAP; m_bitmapCaption.GetBitmap(pBitMap); width=pBitMap->bmWidth; height=pBitMap->bmHeight; pDC->StretchBlt( rect.left, rect.top, rect.Width(),rect.Height(), &memDC, 0, 0, width,height, SRCCOPY ); //get the the text of the caption and draw it with 3D style pDC->SetBkColor(RGB(209,209,209)); CString caption; GetWindowText(caption); caption = " "+caption+" "; rect.OffsetRect(0,4); //draw the text of the caption with gray color pDC->SetTextColor(RGB(128,128,128)); pDC->DrawText(caption,rect,DT_CENTER|DT_VCENTER); //move the coordinate to left and up rect.OffsetRect(-1,-1); pDC->SetBkMode(TRANSPARENT); //draw the text of the caption with white color pDC->SetTextColor(RGB(255,255,255)); //255,255,255 128,128,128 pDC->DrawText(caption,rect,DT_CENTER|DT_VCENTER); memDC.DeleteDC(); ReleaseDC(pDC); delete pBitMap; }
6.处理鼠标点击按钮的消息。
要响应鼠标左键在标题栏上的单击,需要添加相应的消息映射函数。
通过在OnNcLButtonDown中给关闭按钮换一副图像,来实现按钮被按下的效果,同时完成窗口的关闭。
void CTestDlg::OnNcLButtonDown(UINT nHitTest, CPoint point) { if (nHitTest == HTCAPTION) { // see if in area we reserved for button CRect rect; GetButtonRect(rect); if (rect.PtInRect(point)) { m_bPressed = !m_bPressed; DrawButton(); CDialog::OnCancel(); } } CDialog::OnNcLButtonDown(nHitTest, point); }
7.处理窗口非客户区的重画。
这里主要是对标题栏和按钮的重画。通过ClassWizard给对话框添加非客户区重画的消息映射函数。
void CTestDlg::OnNcPaint() { // draw caption first CDialog::OnNcPaint(); // then draw button on top DrawCaption(); DrawButton(); }
8.给对话框加上背景,在此为一幅位图:
void CTestDlg::OnPaint() { CPaintDC dc(this); // device context for painting CDC memDC; memDC.CreateCompatibleDC(&dc); memDC.SelectObject(m_bmpBk); CRect rect, rectWnd GetWindowRect(rect); GetClientRect(rect); int width,height; BITMAP *pBitMap; pBitMap = new BITMAP; m_bmpBk.GetBitmap(pBitMap); width=pBitMap->bmWidth; height=pBitMap->bmHeight; dc.StretchBlt( rect.left, rect.top, rect.Width(), rect.Height(),&memDC, 0, 0,width,height, SRCCOPY ); }
至此为止,一个具有苹果窗口风格的对话框就新鲜出炉了!怎么样?味道还不错吧?
但是,如果每次要用到对话框的时候都如此这般,岂不是太...那个了吧!不要惊慌,只需稍做改变就可一劳永逸了。将此对话框的构造函数的说明部分改为下面黑体所示即可,就这么简单。(用黑体表示强调的部分)
CTestDlg::CTestDlg(int nID, CWnd * pParent /*=NULL*/) : CDialog(nID, pParent) { //{{AFX_DATA_INIT(CTestDlg) // NOTE: the ClassWizard will add member initialization here //}}AFX_DATA_INIT m_bPressed=FALSE; m_bitmapPressed.LoadBitmap(IDB_BUTTONDOWN); m_bitmapUnpressed.LoadBitmap(IDB_BUTTONUP); m_bitmapCaption.LoadBitmap(IDB_CAPTION); m_bmpBk.LoadBitmap(IDB_BKGROUND); m_brushButton.CreateSolidBrush(RGB(192,192,255)); }
以后,凡是用到对话框的时候,在VC的资源编辑器中把对话框设置好,把父类改为此对话框类即可,当然,要把此对话框类包括在你的Project中,图1所示的对话框就是继承于此对话框。
在CMyDialog的.h文件中将CDialog 改为CTestDlg:
Class CMyDialog: public CTestDlg void CNewapple1Doc::OnDialog1() { // TODO: Add your command handler code here CMyDialog dlg; dlg.DoModal(); }
推荐阅读
-
在 Windows 95/98 中实现苹果窗口界面
-
在Windows中实现窗口置顶的小工具
-
Grid++Report 锐浪报表开发常见问题解答集锦-报表设计 问:怎样在设计时打印预览报表? 答:为了及时查看报表的设计效果,Grid++Report 报表设计应用程序提供了四种查看视图:普通视图、页面视图、预览视图与查询视图。通过窗口下边的 Tab 按钮可以在四种视图中任意切换。在预览视图中查看报表的打印预览效果,在查询视图中查看报表的查询显示效果。如果在报表的记录集提供了数据源连接串与查询 SQL,在进入预览视图与查询视图时会利用数据源连接串与查询 SQL 从数据源中自动取数,否则 Grid++Report 将自动生成模拟数据进行模拟打印预览与查询显示。注意:在预览视图与查询视图中看到的报表运行结果有可能与在你程序中的最终运行结果有差异,因为在报表的生成过程中我们可以在程序中对报表的生成行为进行一定的控制。 问:怎样用 Grid++Report 设计交叉表? 答:Grid++Report 没有提供专门实现交叉表的功能,其它的报表构件提供的交叉表功能一般也比较死板和功能有限。利用 Grid++Report 的编程接口可以做出灵活多变,功能丰富的交叉表。示例程序 CrossTab 就是一个实现交叉表的例子程序,认真领会此例子程序,你就可以做出自己想要各种交叉表,并能提取一些共用代码,便于重复使用。 问:怎样设置整个报表的缺省字体? 答:设置报表主对象的字体属性,也就是设置了整个报表的缺省字体。如果改变报表主对象的字体属性,则没有专门的设置字体属性的子对象的字体属性也跟随改变。同样每个报表节与明细网格也有字体属性,他们的字体属性也就是其拥有的子对象的缺省字体。 问:怎样在打印时限制一页的输出行数? 答:设定明细网格的内容行的‘每页行数(RowsPerPage)’属性即可。另外要注意‘调节行高(AdjustRowHeight)’属性值:为真时根据页面的输出高度自动调整行的高度,使整个页面的输出区域充满。为假时按设计时的高度输出行。 问:怎样显示中文大写金额? 答:将对象的“格式(Format)”属性设为 “$$” 及可,可以设置格式的对象有:字段(IGRField)、参数(IGRParameter)、系统变量(IGRSystemVarBox)与综合文字框(IGRMemoBox),其中综合文字框是在报表式上设格式。 问:能否实现自定义纸张与票据打印? 答:Grid++Report 完全支持自定义纸张的打印,只要在报表设定时在页面设置中选定自定义纸张,并指定准确的纸张尺寸。当然要在最终输出时得道合适的打印结果,输出打印机必须支持自定义纸张打印。Windows2000/XP/2003 操作系统上可以在打印机上定义自定义纸张,也可以采用这种方式实现自定义纸张打印。 问:怎样实现 0 值不打印? 答:直接设置格式串就可以,在“数字格式”设置对话框中选定“0 不显示”,就会得到合适的格式串。也可以通过直接录入格式串来指定 0 不显示,但格式串必须符合 Grid++Report 的规定格式。另一种实现办法是在报表获取明细记录数据时,在 BeforePostRecord 事件中将值为零的字段设为空,调用字段的 Clear 方法将字段置为空。 问:怎样实现多栏报表? 答:在明细网格上设‘页栏数(PageColumnCount)’属性值大于 1 即可。通过 Grid++Report 的“页栏输出顺序”还可以指定多栏报表的输出顺序是“先从上到下”还是“先从左到右”。 问:如何实现票据套打? 答:Grid++Report 为实现票据套打做了很多专门的安排:报表设计器提供了页面设计模式,按照设定的纸张尺寸显示设计面板,如果将空白票据的扫描图设为设计背景图,在定位报表内容的输出位置会非常方便。报表部件可以设定打印类别,非套打输出的内容在套打打印模式下就不会输出。 问:Grid++Report 有没有横向分页功能? 答:回答是肯定的,在列的总宽度超过打印页面的输出宽度时,Grid++Report 可以另起新页输出剩余的列,如果左边存在锁定列,锁定列可以在后面的新页中重复输出,这样可以保证关键数据列在每一页都有输出。仔细体会 Grid++Report 提供的多种打印适应策略,选用最合适的方式。Grid++Report 的多种打印适应策略为开发动态报表提供了很好的支持。 问:怎样实现报表本页小计功能? 答:定义一个报表分组,将本分组定义为页分组,在本分组的分组头与分组尾上定义统计。页分组就是在每页产生一个分组项,在每页的上端与下端都会分别显示页分组的分组头与分组尾,页分组不用定义分组依据字段。 报表运行 问:怎样与数据库建立连接? 答:如果在设计报表时指定了数据集的数据源连接串与查询 SQL 语句,Grid++Report 采用拉模式直接从数据源取得报表数据,Grid++Report 利用 OLE DB 从数据源取数,OLE DB 提供了广泛的数据源操作能力。如果 Grid++Report 的数据来源采用推模式,即 Grid++Report 不直接与数据库建立连接,各种编程语言/平台都提供了很好的数据库连接方式,并且易于操作,应用程序在报表主对象(IGridppReport)的 FetchRecord 事件中将数据传入,例子程序提供了各种编程语言填入数据的通用方法,对C++Builder 和 Delphi 还进行了专门的包装,直接关联 TDataSet 对象也可以将 TDataSet 对象中的数据传给报表。 问:打印时能否对打印纸张进行自适应?支持表格的折行打印吗? 答:Grid++Report 在打印时采用多种适应策略,通过设置明细网格(IGRDetailGrid)的‘打印策略(PrintAdaptMethod)’属性指定打印策略。(1)丢弃:按设计时列的宽度输出,超出范围的内容不显示。(2)绕行:按设计时列的宽度输出,如果在当前行不能完整输出,则另起新行进行输出。(3)缩放适应:对所有列的输出宽度进行按比例地缩放,使总宽度等于页面的输出宽度。(4)缩小适应:如果列的总宽度小于页面的输出宽度,对所有列的输出宽度进行按比例地缩小,使总宽度等于页面的输出宽度。(5)横向分页:超范围的列在新页中输出。(6)横向分页并重复锁定列。 问:如何改变缺省打印预览窗口的窗口标题? 答:改变报表主对象的‘标题(Title)’属性即可。 问:利用集合对象的编程接口取子对象的接口引用,但不是自己期望的结果。 答:Grid++Report中所有集合对象的下标索引都是从 1 开始,另按对象的名称查找对象的接口引用时,名称字符是不区分大小写的。 问:怎样在运行时控制报表中各个对象的可见性?即怎样在运行时显示或隐藏对象? 答:在报表主对象(GridppReport)的 SectionFormat 事件中设定相应报表子对象的可见(Visible)属性即可。 问:报表主对象重新载入数据,设计器中为什么没有反映新载入的数据? 答:应调用 IGRDesigner 的 Reload 方法。 问:怎样实现不进入打印预览界面,直接将报表打印出来?