在Ubuntu 20.04上设置LNMP环境的简单步骤
简单说明
由于之前是用Centos7搭建的,后来使用ubuntu 20.04的系统做为个人开发环境,所以想在ubuntu上也搭建一下环境,和Centos有一些小区别所以记录一下仅供学习。
安装前准备
下载软件: php:7.3.18 nginx:1.18.0 mariadb:10.5.4
解压文件:
tar zxf php-7.3.18.tar.gz
tar zxf mariadb-10.5.4.tar.gz
tar zxf nginx-1.18.0.tar.gz
安装Nginx
sudo groupadd -r nginx && sudo useradd -r -g nginx -s /sbin/nologin -d /usr/local/nginx nginx
sudo apt install -y libpcre3-dev zlib1g-dev
cd /home/allen/下载/nginx-1.18.0
./configure --user=nginx --group=nginx
make -j 4 && sudo make install
sudo /usr/local/nginx/sbin/nginx -t
#nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
#nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
sudo mv /usr/local/nginx/conf/nginx.conf /usr/local/nginx/conf/nginx.conf.back
sudo vim /usr/local/nginx/conf/nginx.conf
user nginx;
worker_processes 4;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
keepalive_timeout 65;
log_format main '$remote_addr || $remote_user || $time_local || $request || $status || $body_bytes_sent || $http_referer || $http_user_agent || $http_x_forwarded_for';
include /data/www/*/*.conf;
}
sudo chown -R nginx:nginx /usr/local/nginx
sudo vim /lib/systemd/system/nginx.service
[Unit]
Description=nginx
After=network.target
[Service]
Type=forking
ExecStart=/usr/local/nginx/sbin/nginx
ExecReload=/usr/local/nginx/sbin/nginx -s reload
ExecStop=/usr/local/nginx/sbin/nginx -s quit
PrivateTmp=true
[Install]
WantedBy=multi-user.target
sudo systemctl enable nginx
#Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /lib/systemd/system/nginx.service.
reboot
重启后看看有没有启动成功
安装Mariadb
sudo rm -rf /etc/mysql
sudo apt remove -y mysql-common
sudo apt autoremove -y
sudo apt install -y cmake libncurses5-dev libgnutls28-dev
sudo groupadd -r mysql && sudo useradd -r -g mysql -s /sbin/nologin -d /usr/local/mariadb mysql
sudo mkdir -p /data/db /var/log/mariadb
cd /home/allen/下载/mariadb-10.5.4/
cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mariadb -DMYSQL_DATADIR=/data/db -DSYSCONFDIR=/etc -DWITHOUT_TOKUDB=1 -DMYSQL_UNIX_ADDR=/tmp/mysql.sock -DDEFAULT_CHARSET=utf8mb4 -DDEFAULT_COLLATION=utf8mb4_general_ci
make -j 4 && sudo make install
sudo /usr/local/mariadb/scripts/mysql_install_db --user=mysql --datadir=/data/db
sudo vim /etc/my.cnf
[mysqld]
datadir = /data/db
socket = /tmp/mysql.sock
# 建议禁用符号链接,防止各类安全风险
symbolic-links = 0
collation-server = utf8mb4_general_ci
init-connect = 'SET NAMES utf8mb4'
character-set-server = utf8mb4
[mysql]
default-character-set = utf8mb4
[client]
port = 3306
socket = /tmp/mysql.sock
default-character-set = utf8mb4
[mysqld_safe]
log-error = /var/log/mariadb/mariadb.log
pid-file = /var/run/mariadb/mariadb.pid
sudo cp /usr/local/mariadb/support-files/mysql.server /etc/init.d/mariadb
sudo vim /etc/profile.d/mariadb.sh
export PATH=$PATH:/usr/local/mariadb/bin/
sudo chmod 0777 /etc/profile.d/mariadb.sh
source /etc/profile.d/mariadb.sh
sudo /etc/init.d/mariadb start
#Starting mariadb (via systemctl): mariadb.service.
sudo /usr/local/mariadb/bin/mysql_secure_installation
#NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
# SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
#In order to log into MariaDB to secure it, we'll need the current
#password for the root user. If you've just installed MariaDB, and
#haven't set the root password yet, you should just press enter here.
#Enter current password for root (enter for none):
#OK, successfully used password, moving on...
#Setting the root password or using the unix_socket ensures that nobody
#can log into the MariaDB root user without the proper authorisation.
#You already have your root account protected, so you can safely answer 'n'.
#Switch to unix_socket authentication [Y/n] y
#Enabled successfully!
#Reloading privilege tables..
# ... Success!
#You already have your root account protected, so you can safely answer 'n'.
#Change the root password? [Y/n] y
#New password:
#Re-enter new password:
#Password updated successfully!
#Reloading privilege tables..
# ... Success!
#By default, a MariaDB installation has an anonymous user, allowing anyone
#to log into MariaDB without having to have a user account created for
#them. This is intended only for testing, and to make the installation
#go a bit smoother. You should remove them before moving into a
#production environment.
#Remove anonymous users? [Y/n] y
# ... Success!
#Normally, root should only be allowed to connect from 'localhost'. This
#ensures that someone cannot guess at the root password from the network.
#Disallow root login remotely? [Y/n] n
# ... skipping.
#By default, MariaDB comes with a database named 'test' that anyone can
#access. This is also intended only for testing, and should be removed
#before moving into a production environment.
#Remove test database and access to it? [Y/n] y
# - Dropping test database...
# ... Success!
# - Removing privileges on test database...
# ... Success!
#Reloading the privilege tables will ensure that all changes made so far
#will take effect immediately.
#Reload privilege tables now? [Y/n] y
# ... Success!
#Cleaning up...
#All done! If you've completed all of the above steps, your MariaDB
#installation should now be secure.
#Thanks for using MariaDB!
sudo systemctl enable mariadb
sudo chown mysql:mysql -R /usr/local/mariadb /data/db /var/log/mariadb
reboot
重启后看看有没有启动成功
安装PHP
sudo apt install -y libxml2-dev libssl-dev libbz2-dev libcurl4-gnutls-dev libjpeg-dev libpng-dev pkg-config libxslt1-dev libzip-dev libfreetype6-dev libfontconfig1-dev autoconf
sudo groupadd -r php && sudo useradd -r -g php -s /sbin/nologin -d /usr/local/php php
sudo vim /etc/sudoers
php ALL=(ALL:ALL) ALL
cd /home/allen/下载/php-7.3.18/
./configure --prefix=/usr/local/php --exec-prefix=/usr/local/php --with-fpm-user=php --with-fpm-group=php --enable-zip --with-curl --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-mysqli --with-openssl --with-pdo-mysql --with-pdo-sqlite --with-pear --with-xmlrpc --with-xsl --with-zlib --with-bz2 --with-mhash --enable-bcmath --enable-inline-optimization --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-sysvshm --enable-xml --enable-fpm --with-freetype-dir --with-gd --with-libxml-dir --with-pcre-regex --enable-libxml --enable-zip --with-png-dir --with-jpeg-dir
有一个错误:
configure: error: freetype-config not found.
解决办法: 据说:https://www.doopsky.com/ops/981.html
这是由于在 Ubuntu 19.04 中 apt-get 安装的 libfreetype6-dev 版本为 2.9.1-3 http://changelogs.ubuntu.com/changelogs/pool/main/f/freetype/freetype_2.9.1-3/changelog 在 changelog 中写到:
The `freetype-config’ script is no longer installed by default (Closes: #871470, #886461). All packages depending on libfreetype6-dev should use pkg-config to find the relevant CFLAGS and libraries. freetype-config 被替代成 pkg-config ,新版本使用 pkg-config 管理 CFLAGS 和 库。
所以解决方法如下: 主要的思路就是用pkg-config代替freetype-config。安装pkg-config,我在上面已经安装了
cat ./configure | grep "freetype-config" -n
34847: if test -f "$i/bin/freetype-config"; then
34849: FREETYPE2_CONFIG="$i/bin/freetype-config"
34855: as_fn_error $? "freetype-config not found." "$LINENO" 5
36568: if test -f "$i/bin/freetype-config"; then
36570: FREETYPE2_CONFIG="$i/bin/freetype-config"
36576: as_fn_error $? "freetype-config not found." "$LINENO" 5
sed -i "s/freetype-config/pkg-config/g" ./configure
cat ./configure | grep "FREETYPE2_CONFIG --cflags" -n
34858: FREETYPE2_CFLAGS=`$FREETYPE2_CONFIG --cflags`
36579: FREETYPE2_CFLAGS=`$FREETYPE2_CONFIG --cflags`
sed -i "s/FREETYPE2_CONFIG --cflags/FREETYPE2_CONFIG freetype2 --cflags/g" ./configure
cat ./configure | grep "FREETYPE2_CONFIG --libs" -n
34859: FREETYPE2_LIBS=`$FREETYPE2_CONFIG --libs`
36580: FREETYPE2_LIBS=`$FREETYPE2_CONFIG --libs`
sed -i "s/FREETYPE2_CONFIG --libs/FREETYPE2_CONFIG freetype2 --libs/g" ./configure
cat ./ext/gd/config.m4 | grep "freetype-config" -n
188: if test -f "$i/bin/freetype-config"; then
190: FREETYPE2_CONFIG="$i/bin/freetype-config"
196: AC_MSG_ERROR([freetype-config not found.])
sed -i "s/freetype-config/pkg-config/g" ./ext/gd/config.m4
重新编译安装就OK
Thank you for using PHP.
make -j 4 && sudo make install
sudo cp php.ini-production /usr/local/php/lib/php.ini
sudo cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf
sudo cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf
vim /usr/local/php/etc/php-fpm.d/www.conf
listen.mode = 0666
pm.max_children = 128
pm.start_servers = 20
pm.min_spare_servers = 5
pm.max_spare_servers = 35
pm.max_requests = 10000
slowlog = log/$pool.log.slow
rlimit_files = 1024
sudo vim /etc/profile.d/php.sh
export PATH=$PATH:/usr/local/php/bin/
sudo chmod 0777 /etc/profile.d/php.sh && source /etc/profile.d/php.sh
sudo cp sapi/fpm/php-fpm.service /etc/systemd/system/php.service
安装xdebug
下载xdebug http://pecl.php.net/get/xdebug-2.9.6.tgz
cd /home/allen/下载
tar zxf xdebug-2.9.6.tgz
cd xdebug-2.9.6
phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make -j 4 && sudo make install
安装Apcu
下载Apcu http://pecl.php.net/get/apcu-5.1.18.tgz
cd /home/allen/下载
tar zxf apcu-5.1.18.tgz
cd apcu-5.1.18
phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make -j 4 && sudo make install
编辑PHP.INI
sudo
vim /usr/local/php/lib/php.ini
date.timezone = Asia/Shanghai
expose_php = off
max_execution_time = 0
memory_limit = 4096M
display_errors = On
cgi.fix_pathinfo=0
extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20180731/"
extension=pgsql
extension=apcu
zend_extension=/usr/local/php/lib/php/extensions/no-debug-non-zts-20180731/xdebug.so
[xdebug]
xdebug.var_display_max_children=10240
xdebug.var_display_max_data=20480
xdebug.var_display_max_depth=50
启动
sudo systemctl enable php-fpm
sudo chown -R mysql:mysql /usr/local/mariadb
sudo chown -R nginx:nginx /usr/local/nginx
sudo chown -R php:php /usr/local/php
reboot
推荐阅读
-
在Ubuntu 20.04上设置LNMP环境的简单步骤
-
超级详细指南:在Linux上安装LNMP环境的最新步骤
-
在 CentOS 8 上设置 LNMP 环境的简易指南
-
在Mac M1上设置本地的LNMP开发环境
-
在 Ubuntu 18.04 上设置 LNMP 环境
-
在Ubuntu上设置LNMP环境的简易指南
-
在 Ubuntu 18.04 上设置 Tomcat 9 的步骤
-
SSM三大框架基础面试题-一、Spring篇 什么是Spring框架? Spring是一种轻量级框架,提高开发人员的开发效率以及系统的可维护性。 我们一般说的Spring框架就是Spring Framework,它是很多模块的集合,使用这些模块可以很方便地协助我们进行开发。这些模块是核心容器、数据访问/集成、Web、AOP(面向切面编程)、工具、消息和测试模块。比如Core Container中的Core组件是Spring所有组件的核心,Beans组件和Context组件是实现IOC和DI的基础,AOP组件用来实现面向切面编程。 Spring的6个特征: 核心技术:依赖注入(DI),AOP,事件(Events),资源,i18n,验证,数据绑定,类型转换,SpEL。 测试:模拟对象,TestContext框架,Spring MVC测试,WebTestClient。 数据访问:事务,DAO支持,JDBC,ORM,编组XML。 Web支持:Spring MVC和Spring WebFlux Web框架。 集成:远程处理,JMS,JCA,JMX,电子邮件,任务,调度,缓存。 语言:Kotlin,Groovy,动态语言。 列举一些重要的Spring模块? Spring Core:核心,可以说Spring其他所有的功能都依赖于该类库。主要提供IOC和DI功能。 Spring Aspects:该模块为与AspectJ的集成提供支持。 Spring AOP:提供面向切面的编程实现。 Spring JDBC:Java数据库连接。 Spring JMS:Java消息服务。 Spring ORM:用于支持Hibernate等ORM工具。 Spring Web:为创建Web应用程序提供支持。 Spring Test:提供了对JUnit和TestNG测试的支持。 谈谈自己对于Spring IOC和AOP的理解 IOC(Inversion Of Controll,控制反转)是一种设计思想: 在程序中手动创建对象的控制权,交由给Spring框架来管理。IOC在其他语言中也有应用,并非Spring特有。IOC容器实际上就是一个Map(key, value),Map中存放的是各种对象。 将对象之间的相互依赖关系交给IOC容器来管理,并由IOC容器完成对象的注入。这样可以很大程度上简化应用的开发,把应用从复杂的依赖关系中解放出来。IOC容器就像是一个工厂一样,当我们需要创建一个对象的时候,只需要配置好配置文件/注解即可,完全不用考虑对象是如何被创建出来的。在实际项目中一个Service类可能由几百甚至上千个类作为它的底层,假如我们需要实例化这个Service,可能要每次都搞清楚这个Service所有底层类的构造函数,这可能会把人逼疯。如果利用IOC的话,你只需要配置好,然后在需要的地方引用就行了,大大增加了项目的可维护性且降低了开发难度。 Spring中的bean的作用域有哪些? 1.singleton:该bean实例为单例 2.prototype:每次请求都会创建一个新的bean实例(多例)。 3.request:每一次HTTP请求都会产生一个新的bean,该bean仅在当前HTTP request内有效。 4.session:每一次HTTP请求都会产生一个新的bean,该bean仅在当前HTTP session内有效。 5.global-session:全局session作用域,仅仅在基于Portlet的Web应用中才有意义,Spring5中已经没有了。Portlet是能够生成语义代码(例如HTML)片段的小型Java Web插件。它们基于Portlet容器,可以像Servlet一样处理HTTP请求。但是与Servlet不同,每个Portlet都有不同的会话。 Spring中的单例bean的线程安全问题了解吗? 概念用于理解:大部分时候我们并没有在系统中使用多线程,所以很少有人会关注这个问题。单例bean存在线程问题,主要是因为当多个线程操作同一个对象的时候,对这个对象的非静态成员变量的写操作会存在线程安全问题。 有两种常见的解决方案(用于回答的点): 1.在bean对象中尽量避免定义可变的成员变量(不太现实)。 2.在类中定义一个ThreadLocal成员变量,将需要的可变成员变量保存在ThreadLocal(线程本地化对象)中(推荐的一种方式)。 ThreadLocal解决多线程变量共享问题(参考博客):https://segmentfault.com/a/1190000009236777 Spring中Bean的生命周期: 1.Bean容器找到配置文件中Spring Bean的定义。 2.Bean容器利用Java Reflection API创建一个Bean的实例。 3.如果涉及到一些属性值,利用set方法设置一些属性值。 4.如果Bean实现了BeanNameAware接口,调用setBeanName方法,传入Bean的名字。 5.如果Bean实现了BeanClassLoaderAware接口,调用setBeanClassLoader方法,传入ClassLoader对象的实例。 6.如果Bean实现了BeanFactoryAware接口,调用setBeanClassFacotory方法,传入ClassLoader对象的实例。 7.与上面的类似,如果实现了其他*Aware接口,就调用相应的方法。 8.如果有和加载这个Bean的Spring容器相关的BeanPostProcessor对象,执postProcessBeforeInitialization方法。 9.如果Bean实现了InitializingBean接口,执行afeterPropertiesSet方法。 10.如果Bean在配置文件中的定义包含init-method属性,执行指定的方法。 11.如果有和加载这个Bean的Spring容器相关的BeanPostProcess对象,执行postProcessAfterInitialization方法。 12.当要销毁Bean的时候,如果Bean实现了DisposableBean接口,执行destroy方法。 13.当要销毁Bean的时候,如果Bean在配置文件中的定义包含destroy-method属性,执行指定的方法。 Spring框架中用到了哪些设计模式? 1.工厂设计模式:Spring使用工厂模式通过BeanFactory和ApplicationContext创建bean对象。 2.代理设计模式:Spring AOP功能的实现。 3.单例设计模式:Spring中的bean默认都是单例的。 4.模板方法模式:Spring中的jdbcTemplate、hibernateTemplate等以Template结尾的对数据库操作的类,它们就使用到了模板模式。 5.包装器设计模式:我们的项目需要连接多个数据库,而且不同的客户在每次访问中根据需要会去访问不同的数据库。这种模式让我们可以根据客户的需求能够动态切换不同的数据源。 6.观察者模式:Spring事件驱动模型就是观察者模式很经典的一个应用。 7.适配器模式:Spring AOP的增强或通知(Advice)使用到了适配器模式、Spring MVC中也是用到了适配器模式适配Controller。 还有很多。。。。。。。 @Component和@Bean的区别是什么 1.作用对象不同。@Component注解作用于类,而@Bean注解作用于方法。 2.@Component注解通常是通过类路径扫描来自动侦测以及自动装配到Spring容器中(我们可以使用@ComponentScan注解定义要扫描的路径)。@Bean注解通常是在标有该注解的方法中定义产生这个bean,告诉Spring这是某个类的实例,当我需要用它的时候还给我。 3.@Bean注解比@Component注解的自定义性更强,而且很多地方只能通过@Bean注解来注册bean。比如当引用第三方库的类需要装配到Spring容器的时候,就只能通过@Bean注解来实现。 @Configuration public class AppConfig { @Bean public TransferService transferService { return new TransferServiceImpl; } } <beans> <bean id="transferService" class="com.kk.TransferServiceImpl"/> </beans> @Bean public OneService getService(status) { case (status) { when 1: return new serviceImpl1; when 2: return new serviceImpl2; when 3: return new serviceImpl3; } } 将一个类声明为Spring的bean的注解有哪些? 声明bean的注解: @Component 组件,没有明确的角色 @Service 在业务逻辑层使用(service层) @Repository 在数据访问层使用(dao层) @Controller 在展现层使用,控制器的声明 注入bean的注解: @Autowired:由Spring提供 @Inject:由JSR-330提供 @Resource:由JSR-250提供 *扩:JSR 是 java 规范标准 Spring事务管理的方式有几种? 1.编程式事务:在代码中硬编码(不推荐使用)。 2.声明式事务:在配置文件中配置(推荐使用),分为基于XML的声明式事务和基于注解的声明式事务。 Spring事务中的隔离级别有哪几种? 在TransactionDefinition接口中定义了五个表示隔离级别的常量:ISOLATION_DEFAULT:使用后端数据库默认的隔离级别,Mysql默认采用的REPEATABLE_READ隔离级别;Oracle默认采用的READ_COMMITTED隔离级别。ISOLATION_READ_UNCOMMITTED:最低的隔离级别,允许读取尚未提交的数据变更,可能会导致脏读、幻读或不可重复读。ISOLATION_READ_COMMITTED:允许读取并发事务已经提交的数据,可以阻止脏读,但是幻读或不可重复读仍有可能发生ISOLATION_REPEATABLE_READ:对同一字段的多次读取结果都是一致的,除非数据是被本身事务自己所修改,可以阻止脏读和不可重复读,但幻读仍有可能发生。ISOLATION_SERIALIZABLE:最高的隔离级别,完全服从ACID的隔离级别。所有的事务依次逐个执行,这样事务之间就完全不可能产生干扰,也就是说,该级别可以防止脏读、不可重复读以及幻读。但是这将严重影响程序的性能。通常情况下也不会用到该级别。 Spring事务中有哪几种事务传播行为? 在TransactionDefinition接口中定义了八个表示事务传播行为的常量。 支持当前事务的情况:PROPAGATION_REQUIRED:如果当前存在事务,则加入该事务;如果当前没有事务,则创建一个新的事务。PROPAGATION_SUPPORTS: 如果当前存在事务,则加入该事务;如果当前没有事务,则以非事务的方式继续运行。PROPAGATION_MANDATORY: 如果当前存在事务,则加入该事务;如果当前没有事务,则抛出异常。(mandatory:强制性)。 不支持当前事务的情况:PROPAGATION_REQUIRES_NEW: 创建一个新的事务,如果当前存在事务,则把当前事务挂起。PROPAGATION_NOT_SUPPORTED: 以非事务方式运行,如果当前存在事务,则把当前事务挂起。PROPAGATION_NEVER: 以非事务方式运行,如果当前存在事务,则抛出异常。 其他情况:PROPAGATION_NESTED: 如果当前存在事务,则创建一个事务作为当前事务的嵌套事务来运行;如果当前没有事务,则该取值等价于PROPAGATION_REQUIRED。 二、SpringMVC篇 什么是Spring MVC ?简单介绍下你对springMVC的理解? Spring MVC是一个基于Java的实现了MVC设计模式的请求驱动类型的轻量级Web框架,通过把Model,View,Controller分离,将web层进行职责解耦,把复杂的web应用分成逻辑清晰的几部分,简化开发,减少出错,方便组内开发人员之间的配合。 Spring MVC的工作原理了解嘛? image.png Springmvc的优点: (1)可以支持各种视图技术,而不仅仅局限于JSP; (2)与Spring框架集成(如IoC容器、AOP等); (3)清晰的角色分配:前端控制器(dispatcherServlet) , 请求到处理器映射(handlerMapping), 处理器适配器(HandlerAdapter), 视图解析器(ViewResolver)。 (4) 支持各种请求资源的映射策略。 Spring MVC的主要组件? (1)前端控制器 DispatcherServlet(不需要程序员开发) 作用:接收请求、响应结果,相当于转发器,有了DispatcherServlet 就减少了其它组件之间的耦合度。 (2)处理器映射器HandlerMapping(不需要程序员开发) 作用:根据请求的URL来查找Handler (3)处理器适配器HandlerAdapter 注意:在编写Handler的时候要按照HandlerAdapter要求的规则去编写,这样适配器HandlerAdapter才可以正确的去执行Handler。 (4)处理器Handler(需要程序员开发) (5)视图解析器 ViewResolver(不需要程序员开发) 作用:进行视图的解析,根据视图逻辑名解析成真正的视图(view) (6)视图View(需要程序员开发jsp) View是一个接口, 它的实现类支持不同的视图类型(jsp,freemarker,pdf等等) springMVC和struts2的区别有哪些? (1)springmvc的入口是一个servlet即前端控制器(DispatchServlet),而struts2入口是一个filter过虑器(StrutsPrepareAndExecuteFilter)。 (2)springmvc是基于方法开发(一个url对应一个方法),请求参数传递到方法的形参,可以设计为单例或多例(建议单例),struts2是基于类开发,传递参数是通过类的属性,只能设计为多例。 (3)Struts采用值栈存储请求和响应的数据,通过OGNL存取数据,springmvc通过参数解析器是将request请求内容解析,并给方法形参赋值,将数据和视图封装成ModelAndView对象,最后又将ModelAndView中的模型数据通过reques域传输到页面。Jsp视图解析器默认使用jstl。 SpringMVC怎么样设定重定向和转发的? (1)转发:在返回值前面加"forward:",譬如"forward:user.do?name=method4" (2)重定向:在返回值前面加"redirect:",譬如"redirect:http://www.baidu.com" SpringMvc怎么和AJAX相互调用的? 通过Jackson框架就可以把Java里面的对象直接转化成Js可以识别的Json对象。具体步骤如下 : (1)加入Jackson.jar (2)在配置文件中配置json的映射 (3)在接受Ajax方法里面可以直接返回Object,List等,但方法前面要加上@ResponseBody注解。 如何解决POST请求中文乱码问题,GET的又如何处理呢? (1)解决post请求乱码问题: 在web.xml中配置一个CharacterEncodingFilter过滤器,设置成utf-8; <filter> <filter-name>CharacterEncodingFilter</filter-name> <filter-class>org.springframework.web.filter.CharacterEncodingFilter</filter-class> <init-param> <param-name>encoding</param-name> <param-value>utf-8</param-value> </init-param> </filter> <filter-mapping> <filter-name>CharacterEncodingFilter</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> (2)get请求中文参数出现乱码解决方法有两个: ①修改tomcat配置文件添加编码与工程编码一致,如下: <ConnectorURIEncoding="utf-8" connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443"/> ②另外一种方法对参数进行重新编码: String userName = new String(request.getParamter("userName").getBytes("ISO8859-1"),"utf-8") ISO8859-1是tomcat默认编码,需要将tomcat编码后的内容按utf-8编码。 Spring MVC的异常处理 ? 统一异常处理: Spring MVC处理异常有3种方式: (1)使用Spring MVC提供的简单异常处理器SimpleMappingExceptionResolver; (2)实现Spring的异常处理接口HandlerExceptionResolver 自定义自己的异常处理器; (3)使用@ExceptionHandler注解实现异常处理; 统一异常处理的博客:https://blog.csdn.net/ctwy291314/article/details/81983103 SpringMVC的控制器是不是单例模式,如果是,有什么问题,怎么解决? 是单例模式,所以在多线程访问的时候有线程安全问题,不要用同步,会影响性能的,解决方案是在控制器里面不能写成员变量。(此题目类似于上面Spring 中 第5题 有两种解决方案) SpringMVC常用的注解有哪些? @RequestMapping:用于处理请求 url 映射的注解,可用于类或方法上。用于类上,则表示类中的所有响应请求的方法都是以该地址作为父路径。 @RequestBody:注解实现接收http请求的json数据,将json转换为java对象。 @ResponseBody:注解实现将conreoller方法返回对象转化为json对象响应给客户。 SpingMvc中的控制器的注解一般用那个,有没有别的注解可以替代? 一般用@Controller注解,也可以使用@RestController,@RestController注解相当于@ResponseBody + @Controller,表示是表现层,除此之外,一般不用别的注解代替。 如果在拦截请求中,我想拦截get方式提交的方法,怎么配置? 可以在@RequestMapping注解里面加上method=RequestMethod.GET。 怎样在方法里面得到Request,或者Session? 直接在方法的形参中声明request,SpringMVC就自动把request对象传入。 如果想在拦截的方法里面得到从前台传入的参数,怎么得到? 直接在形参里面声明这个参数就可以,但必须名字和传过来的参数一样。 如果前台有很多个参数传入,并且这些参数都是一个对象的,那么怎么样快速得到这个对象? 直接在方法中声明这个对象,SpringMVC就自动会把属性赋值到这个对象里面。 SpringMVC中函数的返回值是什么? 返回值可以有很多类型,有String, ModelAndView。ModelAndView类把视图和数据都合并的一起的。 SpringMVC用什么对象从后台向前台传递数据的? 通过ModelMap对象,可以在这个对象里面调用put方法,把对象加到里面,前台就可以拿到数据。 怎么样把ModelMap里面的数据放入Session里面? 可以在类上面加上@SessionAttributes注解,里面包含的字符串就是要放入session里面的key。 SpringMvc里面拦截器是怎么写的: 有两种写法,一种是实现HandlerInterceptor接口,另外一种是继承适配器类,接着在接口方法当中,实现处理逻辑;然后在SpringMvc的配置文件中配置拦截器即可: <!-- 配置SpringMvc的拦截器 --> <mvc:interceptors> <!-- 配置一个拦截器的Bean就可以了 默认是对所有请求都拦截 --> <bean id="myInterceptor" class="com.zwp.action.MyHandlerInterceptor"></bean> <!-- 只针对部分请求拦截 --> <mvc:interceptor> <mvc:mapping path="/modelMap.do" /> <bean class="com.zwp.action.MyHandlerInterceptorAdapter" /> </mvc:interceptor> </mvc:interceptors> 注解原理: 注解本质是一个继承了Annotation的特殊接口,其具体实现类是Java运行时生成的动态代理类。我们通过反射获取注解时,返回的是Java运行时生成的动态代理对象。通过代理对象调用自定义注解的方法,会最终调用AnnotationInvocationHandler的invoke方法。该方法会从memberValues这个Map中索引出对应的值。而memberValues的来源是Java常量池 三、Mybatis篇 什么是MyBatis? MyBatis是一个可以自定义SQL、存储过程和高级映射的持久层框架。 讲下MyBatis的缓存 MyBatis的缓存分为一级缓存和二级缓存,一级缓存放在session里面,默认就有, 二级缓存放在它的命名空间里,默认是不打开的,使用二级缓存属性类需要实现Serializable序列化接口, 可在它的映射文件中配置<cache/> Mybatis是如何进行分页的?分页插件的原理是什么? 1)Mybatis使用RowBounds对象进行分页,也可以直接编写sql实现分页,也可以使用Mybatis的分页插件。 2)分页插件的原理:实现Mybatis提供的接口,实现自定义插件,在插件的拦截方法内拦截待执行的sql,然后重写sql。 举例:select * from student,拦截sql后重写为:select t.* from (select * from student)t limit 0,10 简述Mybatis的插件运行原理,以及如何编写一个插件? 1)Mybatis仅可以编写针对ParameterHandler、ResultSetHandler、StatementHandler、 Executor这4种接口的插件,Mybatis通过动态代理, 为需要拦截的接口生成代理对象以实现接口方法拦截功能, 每当执行这4种接口对象的方法时,就会进入拦截方法, 具体就是InvocationHandler的invoke方法,当然, 只会拦截那些你指定需要拦截的方法。 2)实现Mybatis的Interceptor接口并复写intercept方法, 然后在给插件编写注解,指定要拦截哪一个接口的哪些方法即可, 记住,别忘了在配置文件中配置你编写的插件。 Mybatis动态sql是做什么的?都有哪些动态sql?能简述一下动态sql的执行原理不? 1)Mybatis动态sql可以让我们在Xml映射文件内, 以标签的形式编写动态sql,完成逻辑判断和动态拼接sql的功能。 2)Mybatis提供了9种动态sql标签:trim|where|set|foreach|if|choose|when|otherwise|bind。 3)其执行原理为,使用OGNL从sql参数对象中计算表达式的值, 根据表达式的值动态拼接sql,以此来完成动态sql的功能。 #{}和${}的区别是什么? 1)#{}是预编译处理,${}是字符串替换。 2)Mybatis在处理#{}时,会将sql中的#{}替换为?号,调用PreparedStatement的set方法来赋值(有效的防止SQL注入); 3)Mybatis在处理${}时,就是把${}替换成变量的值。 为什么说Mybatis是半自动ORM映射工具?它与全自动的区别在哪里? Hibernate属于全自动ORM映射工具, 使用Hibernate查询关联对象或者关联集合对象时, 可以根据对象关系模型直接获取,所以它是全自动的。 而Mybatis在查询关联对象或关联集合对象时, 需要手动编写sql来完成,所以,称之为半自动ORM映射工具。 Mybatis是否支持延迟加载?如果支持,它的实现原理是什么? 1)Mybatis仅支持association关联对象和collection关联集合对象的延迟加载, association指的就是一对一,collection指的就是一对多查询。 在Mybatis配置文件中, 可以配置是否启用延迟加载lazyLoadingEnabled=true|false。 2)它的原理是,使用CGLIB创建目标对象的代理对象, 当调用目标方法时,进入拦截器方法, 比如调用a.getB.getName, 拦截器invoke方法发现a.getB是null值, 那么就会单独发送事先保存好的查询关联B对象的sql, 把B查询上来,然后调用a.setB(b), 于是a的对象b属性就有值了, 接着完成a.getB.getName方法的调用。 这就是延迟加载的基本原理。 MyBatis与Hibernate有哪些不同? 1)Mybatis和hibernate不同,它不完全是一个ORM框架, 因为MyBatis需要程序员自己编写Sql语句, 不过mybatis可以通过XML或注解方式灵活配置要运行的sql语句, 并将java对象和sql语句映射生成最终执行的sql, 最后将sql执行的结果再映射生成java对象。 2)Mybatis学习门槛低,简单易学,程序员直接编写原生态sql, 可严格控制sql执行性能,灵活度高,非常适合对关系数据模型要求不高的软件开发, 例如互联网软件、企业运营类软件等,因为这类软件需求变化频繁, 一但需求变化要求成果输出迅速。但是灵活的前提是mybatis无法做到数据库无关性, 如果需要实现支持多种数据库的软件则需要自定义多套sql映射文件,工作量大。 3)Hibernate对象/关系映射能力强,数据库无关性好, 对于关系模型要求高的软件(例如需求固定的定制化软件) 如果用hibernate开发可以节省很多代码,提高效率。 但是Hibernate的缺点是学习门槛高,要精通门槛更高, 而且怎么设计O/R映射,在性能和对象模型之间如何权衡, 以及怎样用好Hibernate需要具有很强的经验和能力才行。 总之,按照用户的需求在有限的资源环境下只要能做出维护性、 扩展性良好的软件架构都是好架构,所以框架只有适合才是最好。 MyBatis的好处是什么? 1)MyBatis把sql语句从Java源程序中独立出来,放在单独的XML文件中编写, 给程序的维护带来了很大便利。 2)MyBatis封装了底层JDBC API的调用细节,并能自动将结果集转换成Java Bean对象, 大大简化了Java数据库编程的重复工作。 3)因为MyBatis需要程序员自己去编写sql语句, 程序员可以结合数据库自身的特点灵活控制sql语句, 因此能够实现比Hibernate等全自动orm框架更高的查询效率,能够完成复杂查询。 简述Mybatis的Xml映射文件和Mybatis内部数据结构之间的映射关系? Mybatis将所有Xml配置信息都封装到All-In-One重量级对象Configuration内部。 在Xml映射文件中,<parameterMap>标签会被解析为ParameterMap对象, 其每个子元素会被解析为ParameterMapping对象。 <resultMap>标签会被解析为ResultMap对象, 其每个子元素会被解析为ResultMapping对象。 每一个<select>、<insert>、<update>、<delete> 标签均会被解析为MappedStatement对象, 标签内的sql会被解析为BoundSql对象。 什么是MyBatis的接口绑定,有什么好处? 接口映射就是在MyBatis中任意定义接口,然后把接口里面的方法和SQL语句绑定, 我们直接调用接口方法就可以,这样比起原来了SqlSession提供的方法我们可以有更加灵活的选择和设置. 接口绑定有几种实现方式,分别是怎么实现的? 接口绑定有两种实现方式,一种是通过注解绑定,就是在接口的方法上面加 上@Select@Update等注解里面包含Sql语句来绑定, 另外一种就是通过xml里面写SQL来绑定,在这种情况下, 要指定xml映射文件里面的namespace必须为接口的全路径名. 什么情况下用注解绑定,什么情况下用xml绑定? 当Sql语句比较简单时候,用注解绑定;当SQL语句比较复杂时候,用xml绑定,一般用xml绑定的比较多 MyBatis实现一对一有几种方式?具体怎么操作的? 有联合查询和嵌套查询,联合查询是几个表联合查询,只查询一次, 通过在resultMap里面配置association节点配置一对一的类就可以完成; 嵌套查询是先查一个表,根据这个表里面的结果的外键id, 去再另外一个表里面查询数据,也是通过association配置, 但另外一个表的查询通过select属性配置。 Mybatis能执行一对一、一对多的关联查询吗?都有哪些实现方式,以及它们之间的区别? 能,Mybatis不仅可以执行一对一、一对多的关联查询, 还可以执行多对一,多对多的关联查询,多对一查询, 其实就是一对一查询,只需要把selectOne修改为selectList即可; 多对多查询,其实就是一对多查询,只需要把selectOne修改为selectList即可。 关联对象查询,有两种实现方式,一种是单独发送一个sql去查询关联对象, 赋给主对象,然后返回主对象。另一种是使用嵌套查询,嵌套查询的含义为使用join查询, 一部分列是A对象的属性值,另外一部分列是关联对象B的属性值, 好处是只发一个sql查询,就可以把主对象和其关联对象查出来。 MyBatis里面的动态Sql是怎么设定的?用什么语法? MyBatis里面的动态Sql一般是通过if节点来实现,通过OGNL语法来实现, 但是如果要写的完整,必须配合where,trim节点,where节点是判断包含节点有 内容就插入where,否则不插入,trim节点是用来判断如果动态语句是以and 或or 开始,那么会自动把这个and或者or取掉。 Mybatis是如何将sql执行结果封装为目标对象并返回的?都有哪些映射形式? 第一种是使用<resultMap>标签,逐一定义列名和对象属性名之间的映射关系。 第二种是使用sql列的别名功能,将列别名书写为对象属性名, 比如T_NAME AS NAME,对象属性名一般是name,小写, 但是列名不区分大小写,Mybatis会忽略列名大小写,
-
在 Ubuntu 20.04 系统上安装 vncserver 的步骤
-
epoll简介及触发模式(accept、read、send)-epoll的简单介绍 epoll在LT和ET模式下的读写方式 一、epoll的接口非常简单,一共就三个函数:1. int epoll_create(int size);创建一个epoll的句柄,size用来告诉内核这个监听的数目一共有多大。这个参数不同于select中的第一个参数,给出最大监听的fd+1的值。需要注意的是,当创建好epoll句柄后,它就是会占用一个fd值,在linux下如果查看/proc/进程id/fd/,是能够看到这个fd的,所以在使用完epoll后,必须调用close关闭,否则可能导致fd被耗尽。2. int epoll_ctl(int epfd, int op, int fd, struct epoll_event *event);epoll的事件注册函数,它不同与select是在监听事件时告诉内核要监听什么类型的事件,而是在这里先注册要监听的事件类型。第一个参数是epoll_create的返回值,第二个参数表示动作,用三个宏来表示:EPOLL_CTL_ADD:注册新的fd到epfd中;EPOLL_CTL_MOD:修改已经注册的fd的监听事件;EPOLL_CTL_DEL:从epfd中删除一个fd;第三个参数是需要监听的fd,第四个参数是告诉内核需要监听什么事,struct epoll_event结构如下:struct epoll_event { __uint32_t events; /* Epoll events */ epoll_data_t data; /* User data variable */};events可以是以下几个宏的集合:EPOLLIN :表示对应的文件描述符可以读(包括对端SOCKET正常关闭); EPOLLIN事件:EPOLLIN事件则只有当对端有数据写入时才会触发,所以触发一次后需要不断读取所有数据直到读完EAGAIN为止。否则剩下的数据只有在下次对端有写入时才能一起取出来了。现在明白为什么说epoll必须要求异步socket了吧?如果同步socket,而且要求读完所有数据,那么最终就会在堵死在阻塞里。 EPOLLOUT:表示对应的文件描述符可以写; EPOLLOUT事件:EPOLLOUT事件只有在连接时触发一次,表示可写,其他时候想要触发,那要先准备好下面条件:1.某次write,写满了发送缓冲区,返回错误码为EAGAIN。2.对端读取了一些数据,又重新可写了,此时会触发EPOLLOUT。简单地说:EPOLLOUT事件只有在不可写到可写的转变时刻,才会触发一次,所以叫边缘触发,这叫法没错的!其实,如果真的想强制触发一次,也是有办法的,直接调用epoll_ctl重新设置一下event就可以了,event跟原来的设置一模一样都行(但必须包含EPOLLOUT),关键是重新设置,就会马上触发一次EPOLLOUT事件。1. 缓冲区由满变空.2.同时注册EPOLLIN | EPOLLOUT事件,也会触发一次EPOLLOUT事件这个两个也会触发EPOLLOUT事件 EPOLLPRI:表示对应的文件描述符有紧急的数据可读(这里应该表示有带外数据到来);EPOLLERR:表示对应的文件描述符发生错误;EPOLLHUP:表示对应的文件描述符被挂断;EPOLLET: 将EPOLL设为边缘触发(Edge Triggered)模式,这是相对于水平触发(Level Triggered)来说的。EPOLLONESHOT:只监听一次事件,当监听完这次事件之后,如果还需要继续监听这个socket的话,需要再次把这个socket加入到EPOLL队列里3. int epoll_wait(int epfd, struct epoll_event * events, int maxevents, int timeout);等待事件的产生,类似于select调用。参数events用来从内核得到事件的集合,maxevents告之内核这个events有多大,这个maxevents的值不能大于创建epoll_create时的size,参数timeout是超时时间(毫秒,0会立即返回,-1将不确定,也有说法说是永久阻塞)。该函数返回需要处理的事件数目,如返回0表示已超时。-------------------------------------------------------------------------------------------- 从man手册中,得到ET和LT的具体描述如下EPOLL事件有两种模型:Edge Triggered (ET)Level Triggered (LT)假如有这样一个例子:1. 我们已经把一个用来从管道中读取数据的文件句柄(RFD)添加到epoll描述符2. 这个时候从管道的另一端被写入了2KB的数据3. 调用epoll_wait(2),并且它会返回RFD,说明它已经准备好读取操作4. 然后我们读取了1KB的数据5. 调用epoll_wait(2)......Edge Triggered 工作模式:如果我们在第1步将RFD添加到epoll描述符的时候使用了EPOLLET标志,那么在第5步调用epoll_wait(2)之后将有可能会挂起,因为剩余的数据还存在于文件的输入缓冲区内,而且数据发出端还在等待一个针对已经发出数据的反馈信息。只有在监视的文件句柄上发生了某个事件的时候 ET 工作模式才会汇报事件。因此在第5步的时候,调用者可能会放弃等待仍在存在于文件输入缓冲区内的剩余数据。在上面的例子中,会有一个事件产生在RFD句柄上,因为在第2步执行了一个写操作,然后,事件将会在第3步被销毁。因为第4步的读取操作没有读空文件输入缓冲区内的数据,因此我们在第5步调用 epoll_wait(2)完成后,是否挂起是不确定的。epoll工作在ET模式的时候,必须使用非阻塞套接口,以避免由于一个文件句柄的阻塞读/阻塞写操作把处理多个文件描述符的任务饿死。最好以下面的方式调用ET模式的epoll接口,在后面会介绍避免可能的缺陷。 i 基于非阻塞文件句柄 ii 只有当read(2)或者write(2)返回EAGAIN时才需要挂起,等待。但这并不是说每次read时都需要循环读,直到读到产生一个EAGAIN才认为此次事件处理完成,当read返回的读到的数据长度小于请求的数据长度时,就可以确定此时缓冲中已没有数据了,也就可以认为此事读事件已处理完成。Level Triggered 工作模式相反的,以LT方式调用epoll接口的时候,它就相当于一个速度比较快的poll(2),并且无论后面的数据是否被使用,因此他们具有同样的职能。因为即使使用ET模式的epoll,在收到多个chunk的数据的时候仍然会产生多个事件。调用者可以设定EPOLLONESHOT标志,在 epoll_wait(2)收到事件后epoll会与事件关联的文件句柄从epoll描述符中禁止掉。因此当EPOLLONESHOT设定后,使用带有 EPOLL_CTL_MOD标志的epoll_ctl(2)处理文件句柄就成为调用者必须作的事情。然后详细解释ET, LT:LT(level triggered)是缺省的工作方式,并且同时支持block和no-block socket.在这种做法中,内核告诉你一个文件描述符是否就绪了,然后你可以对这个就绪的fd进行IO操作。如果你不作任何操作,内核还是会继续通知你的,所以,这种模式编程出错误可能性要小一点。传统的select/poll都是这种模型的代表.ET(edge-triggered)是高速工作方式,只支持no-block socket。在这种模式下,当描述符从未就绪变为就绪时,内核通过epoll告诉你。然后它会假设你知道文件描述符已经就绪,并且不会再为那个文件描述符发送更多的就绪通知,直到你做了某些操作导致那个文件描述符不再为就绪状态了(比如,你在发送,接收或者接收请求,或者发送接收的数据少于一定量时导致了一个EWOULDBLOCK 错误)。但是请注意,如果一直不对这个fd作IO操作(从而导致它再次变成未就绪),内核不会发送更多的通知(only once),不过在TCP协议中,ET模式的加速效用仍需要更多的benchmark确认(这句话不理解)。在许多测试中我们会看到如果没有大量的idle -connection或者dead-connection,epoll的效率并不会比select/poll高很多,但是当我们遇到大量的idle- connection(例如WAN环境中存在大量的慢速连接),就会发现epoll的效率大大高于select/poll。(未测试)另外,当使用epoll的ET模型来工作时,当产生了一个EPOLLIN事件后,读数据的时候需要考虑的是当recv返回的大小如果等于请求的大小,那么很有可能是缓冲区还有数据未读完,也意味着该次事件还没有处理完,所以还需要再次读取: 这里只是说明思路(参考《UNIX网络编程》) while(rs) {buflen = recv(activeevents[i].data.fd, buf, sizeof(buf), 0);if(buflen < 0){// 由于是非阻塞的模式,所以当errno为EAGAIN时,表示当前缓冲区已无数据可读// 在这里就当作是该次事件已处理处.if(errno == EAGAIN)break; else return; }else if(buflen == 0) { // 这里表示对端的socket已正常关闭. } if(buflen == sizeof(buf) rs = 1; // 需要再次读取 else rs = 0; } 还有,假如发送端流量大于接收端的流量(意思是epoll所在的程序读比转发的socket要快),由于是非阻塞的socket,那么send函数虽然返回,但实际缓冲区的数据并未真正发给接收端,这样不断的读和发,当缓冲区满后会产生EAGAIN错误(参考man send),同时,不理会这次请求发送的数据.所以,需要封装socket_send的函数用来处理这种情况,该函数会尽量将数据写完再返回,返回-1表示出错。在socket_send内部,当写缓冲已满(send返回-1,且errno为EAGAIN),那么会等待后再重试.这种方式并不很完美,在理论上可能会长时间的阻塞在socket_send内部,但暂没有更好的办法. ssize_t socket_send(int sockfd, const char* buffer, size_t buflen) { ssize_t tmp; size_t total = buflen; const char *p = buffer; while(1) { tmp = send(sockfd, p, total, 0); if(tmp < 0) { // 当send收到信号时,可以继续写,但这里返回-1. if(errno == EINTR) return -1; // 当socket是非阻塞时,如返回此错误,表示写缓冲队列已满, // 在这里做延时后再重试. if(errno == EAGAIN) { usleep(1000); continue; } return -1; } if((size_t)tmp == total) return buflen; total -= tmp; p += tmp; } return tmp; } 二、epoll在LT和ET模式下的读写方式 在一个非阻塞的socket上调用read/write函数, 返回EAGAIN或者EWOULDBLOCK(注: EAGAIN就是EWOULDBLOCK) 从字面上看, 意思是: * EAGAIN: 再试一次 * EWOULDBLOCK: 如果这是一个阻塞socket, 操作将被block * perror输出: Resource temporarily unavailable 总结: 这个错误表示资源暂时不够, 可能read时, 读缓冲区没有数据, 或者, write时,写缓冲区满了 。 遇到这种情况, 如果是阻塞socket, read/write就要阻塞掉。 而如果是非阻塞socket, read/write立即返回-1, 同 时errno设置为EAGAIN. 所以, 对于阻塞socket, read/write返回-1代表网络出错了. 但对于非阻塞socket, read/write返回-1不一定网络真的出错了. 可能是Resource temporarily unavailable. 这时你应该再试, 直到Resource available. 综上, 对于non-blocking的socket, 正确的读写操作为: 读: 忽略掉errno = EAGAIN的错误, 下次继续读 写: 忽略掉errno = EAGAIN的错误, 下次继续写 对于select和epoll的LT模式, 这种读写方式是没有问题的. 但对于epoll的ET模式, 这种方式还有漏洞. epoll的两种模式 LT 和 ET